Just Where is the Starter Relay on a 1997 Chrysler Sebring Convertible Jxi?
Posted by Russell Wright on September 27, 2010
I think I just had another starter quit in my Sebring Convertible. At least I got it into the garage before it gave up the ghost!
I’m troubleshooting…and it’s been a long time since I’ve had to troubleshoot a starter in this car…so I thought I’d start with the starter relay. It’s located in the Power Distribution Center (PDC), but my preliminary investigation didn’t find it. I originally looked in under the cover that has POSITIVE written on it. What the shop manual doesn’t tell you is that there is another piece to the PDC. The relay is actually in the “auxiliary” PDC, which is located under the intake hose. Remove one bolt holding the plastic piece on the intake plenum, loosen the screw on the intake hose clamp, and disconnect the air cleaner cover to access it. Here are the pics.
Russ' Do It Yourself Home Workshop 
Bert said
Thanks!!! Very helpful!!!
c said
not helpful at all.
Russell Wright said
Sorry, perhaps you could elaborate.
sherrye carter said
helpful
Dane said
Before I looked everywhere and couldn’t find where it was. Really helped. Thanks for the details and pics.
Paul said
How about on a 2007 Chrysler Sebring ??
Russell Wright said
Not sure. Too new for me!
prdesignsinc777 said
Thanks you I finally got my car fix by replacing the ASD relay, i took my 1998 Chrysler Sebring Convertible Jxi, to 2 shops they didn’t fine the problem one said is your gas pup, and the other said full injectors, man i was looking and $500 to $700 in repairs, all i spend for the relay was $23 at Autozone.
thank again Sweet.